A Site for Photographers by Photographers

Community > Forums > Digital Darkroom > Scanning>Scanners>Flatbed > Epson flatbed scanners that...

Featured Equipment Deals

Five Top U.S. Photography Schools to Consider Read More

Five Top U.S. Photography Schools to Consider

Are you thinking of going to photo school? Photo.net conducted an independent survey to find out which schools are the most recommended by other photographers.

Latest Equipment Articles

4 Outdoor & Adventure Photo Packs Read More

4 Outdoor & Adventure Photo Packs

Photo packs have come a long way in the past decade, especially those that are targeted toward outdoor and adventure photographers. Alaska-based adventure photographer Dan Bailey takes a closer look...

Latest Learning Articles

5 Tips for Combating Red-Eye Read More

5 Tips for Combating Red-Eye

Red-eye doesn't have to ruin your photos. Learn 5 simple tricks to avoid and eliminate this undesirable photographic effect.


Epson flatbed scanners that scan 4x5 film?

Dave Redmann , Aug 19, 2011; 06:46 p.m.

As I understand, the only Epson flatbed scanners that will scan 4x5 film are the 2450, 3200, 4870, 4990, V700, and V750. Is this correct? Will any of those models not scan 4x5 film? Have I left out any models that will scan 4x5 film?

In terms of the differences among these models:
* As I understand, the 4990, V700, and V750 have Digital ICE, but the other models to not--is this correct? What about the 4870?
* Epson is releasing new drivers for Windows 7 etc. for 4990, V700, and V750, while the older models have to soldier along with either old drivers or third party software. Is this correct?
* I realize that there are differences in the nominal resolutions, and by most accounts the effective resolutions--not interested in re-treading the debate about what the effective resolutions are.
* Any other important differences?

Thanks!

Responses

Richard Sperry , Aug 19, 2011; 06:48 p.m.

All of the specs can be found on the Epson site.

Marc Rochkind , Aug 19, 2011; 07:02 p.m.

I can highly recommend the V700. Haven't used it for 4x5, only medium format and 35mm. I don't use the Digital ICE, as various articles recommend not to. I wouldn't think you'd need it for 4x5.

Louis Meluso , Aug 19, 2011; 10:29 p.m.

I have a V750 running under Win7, works great for large and medium format. Both the V700 and V750 have adjustable height holders. You'll want that to tune the focus point of the scanner. You can also buy third party adjustable scanner for most of the scanners on your list from Betterscanning.com (tip: they're better than the Epson holders)

David Littleboy (Tokyo, Japan) , Aug 20, 2011; 05:19 a.m.

"soldier along with either old drivers or third party software."
Vuescan is a big improvement over Epson Scan. Highly recommended, whichever model you use. There's a bit of a learning curve, but it gives much better control over the scanner. Also, Vuescan's IR clean can be persuaded to work without introducing artifacts, unlike Epson's ICE.

Marc Rochkind , Aug 20, 2011; 02:46 p.m.

I scan to raw with VueScan and then take it most of the rest of the way with the PerfectColor PS plugin, with final tuning in Lightroom.

Michael McBroom , Aug 21, 2011; 02:09 p.m.

I own a 4990, which I bought used a couple years ago because I wanted 4x5 capability but couldn't afford a V7xx. It's been a solid performer, and on the whole I've been satisfied with its output.

I have my machine set up to dual-boot between XP and Win7. I don't recall now if I installed Win7-specific drivers for my 4990. Probably did.

I personally do not like VueScan, and actually prefer Epson Scan. It does everything I need and more. VueScan has a rather unfinished look and feel to it, and I still haven't figured out how to adjust individual images and then assemble them into a batch for scanning. It seems that VuewScan wants the adjustments to apply to every image in the batch. Maybe I just haven't figured it out yet, but this is enough for me not to use it.

I do not use Epson Scan's digital ICE function because it noticeably reduces image sharpness. I also do not use its dust removal setting because it adds artifacts to the image that resemble slivers of glass. So I end up hand-retouching all my scans. Time consuming, but it gives me the best results.

Back to top

Notify me of Responses